|
|
Flush Mount Rod Holders
|
 |
Made of 100% 316 stainless steel, these flush mount in-gunnel rod holders feature an extra large, low profile cap which enhances the appearence of any boat.
|
|
They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of down riggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.
|
|
Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". They have a choice of 0°, 15° or 30° cap angle in highly polished silver finish, with a heavy duty 100% welded tube-to-cap joint which will not break out.
|
|
|
100% Welded Cap
Cast Gimbal Bar
|
|
|
|
|
| Part Number | Angle | Length | ID |
| 53670A |
0° |
9" |
1-5/8" Id.
|
| 53671A |
15° |
9" |
1-5/8" Id..
|
| 53672A |
30° |
9" |
1-5/8" Id..
|
|
Heavy Duty C Series Flush Mount Rod Holders
|
|
The 70C and 80C series feature a beautifully rounded cast bottom end with a 1/2" threaded drain. Use them when the bottom of the rod holder must have a decorative appeatance, or add a drain tube and use when there is dry storage space under the rod holder.
|
|
Highly Polished silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.
|
|
They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of down riggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.
|
|
1/2" Threaded Drain
|
|
|
| Part Number | Angle | Length | ID |
| 53670CA |
0° |
9" |
1-5/8" Id.
|
| 53671CA |
15° |
9" |
1-5/8" Id..
|
| 53672CA |
30° |
9" |
1-5/8" Id..
|
| 53680CA |
0° |
10 1/2" |
1-7/8" Id.
|
| 53681CA |
15° |
10 1/2" |
1-7/8" Id..
|
| 53682CA |
30° |
10 1/2" |
1-7/8" Id..
|
|
|
Copyright © 2001 C. E. Smith Company, Inc.
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)