|
|
|
Installing Heavy Duty Tire Carrier P/N 27310G
|
| |
1. |
USE U-BOLTS CLOSEST TO THE SIZE OF YOUR TRAILER FRAME OR TONGUE.
|
| |
2. |
Hold tire carrier to trailer tongue or frame and place U-bolts as shown around frame
through top hole and bottom slot on each side of tire bracket. Loosely secure
U-bolts with washers and nuts.
|
| |
3. |
When you have determined the tire carrier is located properly, tighten all four nuts
evenly.
|
| |
4. |
Place 1/2" carriage bolts from the back through square holes on the tire mounting
plate. Top slot provide adjustment for 5-bolt rim with 4-1/2" bolt circle.
|
| |
5. |
Use 3/4" box end wrench to place puch nuts over carriage head bolts to hold them in
place.
|
| |
6. |
Put tire over bolts and secure qith washer, lockwasher and nut. Will accept 12",
13", 14" and 15" tires.
|
Parts Included
|
| QTY |
Discription |
P/N |
| 1 |
U-Bolt, 7/16" x 4-1/8" x 3-1/4" |
15264 |
| 1 |
U-Bolt, 7/16" x 4-1/8" x 3-1/4", Formed |
15265 |
| 1 |
U-Bolt, 7/16" x 4-1/8" x 4-1/4" |
15256 |
| 1 |
U-Bolt, 7/16" x 4-1/8" x 4-1/4", Formed |
15263 |
| 4 |
7/16" Flat Washer |
10961 |
| 4 |
7/16" Nylon Locknut |
10811 |
| 2 |
1/2" x 1-3/4" carriage Head Bolt |
11039 |
| 2 |
1/2" Push Nut |
10802 |
| 2 |
1/2" Flat Washer |
10963Z |
| 2 |
1/2" Lockwasher |
10972 |
| 2 |
1/2" Hex Nut |
10845 |
|
Copyright © 2001 C. E. Smith Company, Inc.
|
|
