info.gif boatguide.gif hullsup.gif brackets.gif roller.gif hardw.gif tirec.gif hitch.gif under.gif fender.gif 12volt.gif dollys.gif rodhold.gif ttop.gif 48800.gif tw.gif shop150.gif new products custserv.gif retail.gif retail.gif ttop3.jpg coinfo.gif home.gif cat.gif

Installing Post Style
Boat Guide-On
    1.   Place u-bolts as shown above for either 2" wide or 3" wide trailer frame.
    2.   Use 1 flat u-bolt and 1 formed u-bolt with washers to loosely attach each u-shaped bracket under or on top of trailer frame at desired locations.
    3.   Insert the short leg of a guide-on upright post into each of the u-brackets to the desired width.  Do not fully tighten bolts. (Make sure the upright posts are seated level in the u-brackets and the brackets are set the correct distance apart before completely tightening the u-bolts.)
    4.   Finish tightening the u-bolt connections.

Tools Required
You will need (2) 9/16" wrenches

Parts Included P/N 27620
QTY Discription P/N
2 Galv. Tube uprights 27622PG
2 White PVC Cap 11331
2 White PVC tube, 36" 11338
2 Galv. u-brackets 27603PG
8 3/8"-16 Nylon locknuts 10810
8 3/8" USS flat washers 10960
2 3/8"-16 x 2-1/4" Hex head bolts 11022
2 3/8"-16 3-1/2" x 5" u-bolts 15258
2 3/8"-16 3-1/2" x 5" Formed u-bolts 15259


Parts Included P/N 27640
QTY Discription P/N
2 Galv. Tube uprights 27641PG
2 White PVC Cap 11331
2 White PVC tube, 56" 11370
2 Galv. u-brackets 27603PG
8 3/8"-16 Nylon locknuts 10810
8 3/8" USS flat washers 10960
2 3/8"-16 x 2-1/4" Hex head bolts 11022
2 3/8"-16 3-1/2" x 5" u-bolts 15258
2 3/8"-16 3-1/2" x 5" Formed u-bolts 15259





Copyright © 2001 C. E. Smith Company, Inc.